Application:

Paper and packaging industry: For bonding folding boxes and cartons, as well as bags.

Characteristics / Directions for Use:

Good mechanical processing characteristics, short setting time, good wet tack and final strength on paper coated with aluminium or PE, expanded polystyrene, and bondable UV varnishes. A declaration concerning the food contact status of the product is available upon request. Processing on automatic systems with disc or roller applicators. We recommend that all materials coming into contact with the glue are made of high-quality stainless steel (German standard V2A according to EN 10027 – W‑No. 1.4301 or better quality) or of inert plastics, e.g. Teflon, PP, polyamide. For more information, contact the equipment manufacturer or our technical service. Appearance: colourless transparent Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks”. General bonding requirements The properties of the substrates and the processing conditions will influence the processes of joining and the quality of the bond. Customer tests before use are therefore absolutely necessary to define stable process parameters. The materials to be bonded should be free of dust, oil, and grease, and be completely dry. The surface tension of the films to be bonded should be above 38 mN/m.

Cleaning:

Machines and equipment may be cleaned after use with warm or cold water, using Jowat® Cleaner Concentrate 192.40.

Storage:

Protect from frost! The product should remain stored in properly closed original containers, dry and cool (15 – 25 °C). Do not remove the lid completely during processing to prevent the adhesive from drying and the formation of particles. For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application.

Packaging:

Information about packaging types and units is available upon request.

Remarks:

For further information concerning safety, handling, transport and disposal, please refer to the Safety Data Sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.

Please refer to the "Download" tab for the safety data sheet.