Application:

Modified polyisocyanate to increase water resistance and adhesion when mixed with various dispersion adhesives.

Characteristics / Directions for Use:

Increases the dispersion adhesive's resistance to moisture, also increases the adhesive properties. Please refer to the individual data sheets for the various dispersion glues. Containers which are used to pre-mix Jowat® 195.60 may not be tightly closed (they may burst due to formation of CO2). Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks”.

Cleaning:

Machines and equipment soiled with the mix of glue and crosslinking agent can be cleaned after use with warm or cold water, using Jowat® cleaner concentrate 192.40. Parts only soiled with the crosslinking agent may be cleaned with Jowat® thinner 402.32. Cured adhesive compound can only be removed mechanically.

Storage:

The product should remain stored in properly closed original containers, dry and cool (15 – 25 °C). For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application. Protect from frost! The product has a tendency to crystallise at temperatures below 13 °C.

Packaging:

Information about packaging types and units is available upon request.

Remarks:

For further information concerning safety, handling, transport and disposal, please refer to the Safety Data Sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.

For the complete technical data sheet click here

• Sicherheitsdatenblatt